Hardware and peripherals   SATA HAT


Topic Replies Activity
About the SATA HAT category 4 December 10, 2019
SATA Hat - HDD size restrictions 4 October 22, 2020
Powering 3.5 drives traight from PSU 3 October 22, 2020
SATA Hat disconnects when copying large file over network (samba) 6 October 21, 2020
Quad SATA Hat Raid 5 - Drive gets expelled from array 4 October 21, 2020
OLED works but no Fan or switch 14 October 21, 2020
Power management and spindown time HDD settings 2 October 20, 2020
Issues with fstab and Pi going into Emergency Mode 7 October 17, 2020
AirFlow on SATA HAT quad 78 October 16, 2020
Quad SATA Hat Top, no OLED display information or push button action 28 October 15, 2020
Display does not show other drives 4 October 14, 2020
Not all drives listed in lsusb 6 October 9, 2020
Solder bridges on SATA pins 6 October 9, 2020
[solved] SATA HAT disconnects disk on heavy use 19 October 9, 2020
Quad SATA HAT Assembly and Troubleshooting 59 September 30, 2020
Power source for 4 x 2TB HDD 3,5" 3 September 29, 2020
Help with top hat not working 8 September 29, 2020
Quad sata hat issues with drives 42 September 27, 2020
Custom housing for RPi4 + SATA HAT 6 September 25, 2020
Raspbian OS 64 bits compatibility for SATA HAT? 2 September 22, 2020
How to use Raid hardware? 4 September 22, 2020
Upper part with display and cooler not working 2 September 22, 2020
Red led on sata 2 September 22, 2020
How to cool the kit? 5 September 21, 2020
HDDs keep spinning after poweroff 10 September 21, 2020
Lightweight Installation (SATA HAT only, no cpu fan, no lcd, no buttons) 36 September 21, 2020
Change Info displayed on OLED 3 September 19, 2020
Feedback and problems 3 September 18, 2020
Raid 5 40MB Write Speed 8 September 18, 2020
Pigpiod eating 7% CPU nonstop 7 September 17, 2020