I made changes to the BIOS V007 and managed to disable the eMMC on the chipset, and finally managed to install Windows 10 22H2 on the NVMe drive… However, I’m now concerned about what I reported in the post ( Radxa X4 won't boot after power outage ). As instructed, I installed a key so that the user can reset the BIOS and thus get the equipment to start normally after a sudden power outage. However, when they do this procedure, the eMMC problem returns, since the eMMC is enabled automatically… Is there any way to disable the eMMC by default so that even after resetting the BIOS, the eMMC is not enabled?