Hi
Using SD card, i cannot boot on zero_debian_buster_xfce4_arm64_20211010_0810-mbr.img
Nothing on my HDMI screen.
Armbian_21.08.0-trunk_Radxa-zero_focal_current_5.10.58_xfce_desktop.img.xz is the single OS that can boot. The GUI starts. Unfortunately after few apt update and install, it starts to crash.
That’s why i wanted to use zero_debian_buster_xfce4_arm64_20211010_0810-mbr.img
Any idea to boot zero_debian_buster_xfce4_arm64_20211010_0810-mbr.img ?
My Zero(512MB, MicroSD 16GB) is working well on zero_debian_buster_xfce4_arm64_20211010_0810-mbr.img.
After copying the image using balenaEtcher on Windows10 with card reader, the zero boots up and works. The green led is on and not blinking. I used type-c usb as power supply, 5v to pin4 is also ok. The xfce4 is also working well via hdmi.
If you have USB-TTL serial cable, you can see the boot process to check the board.
Normally, black wire :pin6, white one :8 and green one:10.
I usually check this using the Minicom on Ubuntu.
Good luck!