Start from NVEM

Hello everyone, buy a complete pack in the store.

  1. ROCK PI 4B 4GB v1.3 + Limited Edition Bundle (incl. Mounted 16MB SPI Flash) × 1
    plus Lenovo NVME SSD 256GB
    Well I follow the manual
    I explain my steps:
    1: I burn image in eMMC I install in rockpi4 and system works fine.
    2: Write image to SPI flash using mtd tool
    3: write image to NVME with etcher image rockpi4b-ubuntu-bionic-minimal-20190104_2101-gpt.img It is the same one I use for the eMMC.
    4: I remove the eMMC from the Rockpi4B board and install the NVME.
    The system does nothing Green LED and constant red LED

Any help thanks.