SPI problems with Rock 5B

Hi everyone

We’re using SPI on a Rock 5B. We’ve had multiple issues:

  • SPI0 not showing a very weak CLK signal, even when disconnected from the slave SPI device.
  • SPI1 suddenly losing the CLK signal, after working reliably for half a day.
  • Dirty CS, lingering at 1.2-1.3V before finally pulling down, no matter what CS channel is used.

Has anyone encountered similar problems? If so, were you able to solve them and how?

Hello, I have re-run the tests and performed a 14-hour burn-in; no loss of the CLK signal occurred, and the SPI CS line could be successfully pulled low to 0.