Power supply/cables are official Raxda from allnetchina
These images have been tested through multiple trials on multiple microsd cards, official Sandisk ultras, Samsung EVO, etc.
There are no other devices plugged into the board (ie nvme)
This board is from the initial preorder production run
Board/cables etc:
Serial logs:
rock-5b_debian_bullseye_de_b36
https://pastebin.com/raw/6JrMR3yq
rock-5b_ubuntu_jammy_cli_b36
Igou: Get a plain 5v3A rpi4 psu , make sure SPI mem is cleared and dd a cli debian B36 image. Then report back.
B36 w/ 5.10.110-11 debian boots from sdcard here. However since I flashed the new u-boot to spi I cant boot any of my distros on nvme ssd. Checked usb hdd boot too and that’s not working. I have to use the B36 sdcard and edit the extlinux.conf to boot them. Images with kernels from 35 or 37 worked well. The kernel numbering going from 37 to 11 is bizarre too.
EDIT: I did what the wiki said and wiped my nvme, installed B36-Deb-Bullseye-KDE. Boots/runs well. I’ll have to look into how booting is done technically and put back the ones I deleted if possible.
