Rock Pi E v3.0 - Corrupted emmc, cannot boot

[Mitchell]

@grbg

To enter Maskrom mode, you usually need to short the recovery button. Please refer to the following:

ROCK Pi E V3.00 (embedded emmc)- Maskrom Mode via USB Male A to Dupont Cable

Hi @Sangam_Prajapati First, make sure you have correctly connected the USB Male A to Dupont Cable to the board’s pin 14, pin 16, and pin 18. If the connection is correct, press and hold the recovery button on the board (located on the bottom side beneath the Ethernet port) before powering on the board. Once powered on, your computer should recognize a Maskrom device. Depending on your operating system, refer to the following documentation to choose the appropriate flashing method: https://do…