Hi all,
I am following the guide provided here using the Windows option: https://wiki.radxa.com/Rock5/install/spi
long story short, I have the board connected and identified as in maskrom mode, bin and img files are downloaded correctly and available. When clicking RUN, the progress reaches the Test Device Success stage and then the program silently exits.
These are the logs of the RKDevTool, any thoughts on how to troubleshoot the issue?
21:17:51 583 RKDevTool v2.9.6.0 start run
21:18:28 430 Layer<1-5>:Download Boot Start
21:18:32 413 Layer<1-5>:Download Boot Success
21:18:32 414 Layer<1-5>:Wait For Maskrom Start
21:18:32 863 Layer<1-5>:Wait For Maskrom Success
21:18:32 864 Layer<1-5>:Test Device Start
21:18:32 874 Layer<1-5>:Test Device Success
21:18:32 883 Layer<1-5>:Check Chip Start
21:18:32 891 Layer<1-5>: Check Chip Success
21:18:32 901 Layer<1-5>:Get FlashInfo Start
21:18:32 909 <LAYER 1-5> INFO:FlashInfo: 00 80 00 00 80 00 04 00 28 00 01
21:18:32 918 <LAYER 1-5> INFO:GetFlashInfo-->Nor storage.
21:18:32 928 Layer<1-5>:Get FlashInfo Success
21:18:32 937 Layer<1-5>:Prepare IDB Start
21:18:32 945 <LAYER 1-5> INFO:CS(1) (16MB) (SAMSUNG)
21:18:32 957 Layer<1-5>:Prepare IDB Success
21:18:32 965 Layer<1-5>:Download IDB Start
21:18:32 974 <LAYER 1-5> INFO:DownloadIDBlock-->New IDB
21:18:34 485 Layer<1-5>:Download IDB Success
21:18:34 487 Layer<1-5>:Wait For Maskrom Start
21:18:34 934 Layer<1-5>:Wait For Maskrom Success
21:18:34 935 Layer<1-5>:Test Device Start
21:18:34 946 Layer<1-5>:Test Device Success