Quad SATA Kit for Pi4 mechanical parts list

#1

I successfully built the Quad SATA Kit Pi4, and after some software fussing, I have it working reasonably well. Unfortunately, in the fussing, I lost one of the screws that hold the bottom plate to the case. Oddly, there were a couple of spare screws, just not the one I lost.

So, is there a parts mechanical parts list for this kit where I can determine the size of the missing screw and try to find a replacement?

Besides this missing screw, I will be replacing the top fan with a more robust (quieter and stronger) model to get the operating temperature down. Then there is the little button at the top that does nothing. The OLED display seems OK, though with the case closed up and working hard, the display will freeze when it gets too hot.

#2

The screw size is m2.5 or m3, and the length is different.

#3

I have no idea why the button doesn’t work. Maybe the button is broken.

#4

Thank you for the information. It’s helpful.

#5

I’ll see if I can apply my 48 years of being an electronics technician, an engineer and then a computer scientist to figure it out. :slightly_smiling_face:

#6

Wow. 48 years of experience.