How to enable autofocus on imx214

SLInfo · November 21, 2025, 2:42am

It don’t focus and there are no vcm driver in overlay.

arch/arm64/boot/dts/rockchip/overlays/rock-5b-radxa-camera-13m-214.dts

d9290e310


      
          		exclusive = "GPIO1_B0", "GPIO4_A0", "csi2_dphy0", "i2c3";
          		description = "Enable Radxa Camera 13M 214.";
          	};
          };
          
          &i2c3 {
          	status = "okay";
          	#address-cells = <1>;
          	#size-cells = <0>;
          
          	imx214: imx214@10 {
          		status = "okay";
          		compatible = "sony,imx214";
          		reg = <0x10>;
          		clocks = <&cru CLK_MIPI_CAMARAOUT_M3>;
          		clock-names = "xvclk";
          		pinctrl-names = "default";
          		pinctrl-0 = <&mipim0_camera3_clk>;
          		power-domains = <&power RK3588_PD_VI>;
          		pwdn-gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>;
          		reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_HIGH>;

zak · April 1, 2026, 11:55am

Hi, Did you ever figure this out? I am running into the same issue…