Heat issue solved by separating SATA HAT and Pi

[michael]

4Y of service

now after 4 years of service time to hand over to pi5

Heat issue solved by separating Penta Hat and Pi5

[24092717b-144] The new Pi5 offers PCIe and this is a good opportunity to create a fall back system and to check if measuring HDD temps without waken up the HDD is possible and with that to skip the external temperature sensors I used in the Pi4b setup The Heat issue solved by separating SATA HAT and Pi, now running close to four years. The first idea was to adopt the design, but that would imply a PCIe extended FFC cable in the front which would not look very appealing. So I remember that in…

and acting from now on as fail over system.