I tried debugging some more and found that the issue is the test -e in the U-boot commands. So I removed the two cases where test is used and rebuild U-boot from the rk3399-pie-gms-express-baseline branch.
Here is the diff
diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h
index b8144c6a7e..0ee7775589 100644
--- a/include/config_distro_bootcmd.h
+++ b/include/config_distro_bootcmd.h
@@ -352,13 +352,8 @@
"${scriptaddr} ${prefix}extlinux/extlinux.conf\0" \
\
"scan_dev_for_extlinux=" \
- "if test -e ${devtype} " \
- "${devnum}:${distro_bootpart} " \
- "${prefix}extlinux/extlinux.conf; then " \
- "echo Found ${prefix}extlinux/extlinux.conf; " \
"run boot_extlinux; " \
- "echo SCRIPT FAILED: continuing...; " \
- "fi\0" \
+ "echo SCRIPT FAILED: continuing...\0" \
\
"boot_a_script=" \
"load ${devtype} ${devnum}:${distro_bootpart} " \
@@ -367,14 +362,8 @@
\
"scan_dev_for_scripts=" \
"for script in ${boot_scripts}; do " \
- "if test -e ${devtype} " \
- "${devnum}:${distro_bootpart} " \
- "${prefix}${script}; then " \
- "echo Found U-Boot script " \
- "${prefix}${script}; " \
"run boot_a_script; " \
"echo SCRIPT FAILED: continuing...; " \
- "fi; " \
"done\0" \
\
"scan_dev_for_boot=" \
That fixed it and now I can boot without microsd card. Below is also the text of the boot log.
In
channel 0
CS = 0
MR0=0x98
MR4=0x3
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
CS = 1
MR0=0x18
MR4=0x2
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x98
MR4=0x2
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
CS = 1
MR0=0x18
MR4=0x2
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 400MHz 0,1
channel 0
CS = 0
MR0=0x98
MR4=0x82
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
CS = 1
MR0=0x18
MR4=0x2
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x98
MR4=0x2
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
CS = 1
MR0=0x18
MR4=0x2
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 800MHz 1,0
Channel 0: LPDDR4,800MHz
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
Channel 1: LPDDR4,800MHz
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
256B stride
ch 0 ddrconfig = 0x101, ddrsize = 0x2020
ch 1 ddrconfig = 0x101, ddrsize = 0x2020
pmugrf_os_reg[2] = 0x3AA1FAA1, stride = 0xD
OUT
Boot1: 2018-06-26, version: 1.14
CPUId = 0x0
ChipType = 0x10, 222
Spi_ChipId = b4016
SpiBootInit:0
mmc0:cmd8,32
mmc0:cmd5,32
mmc0:cmd55,32
mmc0:cmd1,32
mmc0:cmd8,32
mmc0:cmd5,32
mmc0:cmd55,32
mmc0:cmd1,32
mmc0:cmd8,32
mmc0:cmd5,32
mmc0:cmd55,32
mmc0:cmd1,32
SdmmcInit=0 1
StorageInit ok = 21696
SecureMode = 0
SecureInit ret = 0, SecureMode = 0
GPT vendor signature is wrong
LoadTrust Addr:0x1800
No find bl30.bin
No find bl32.bin
Load uboot, ReadLba = 1000
Load OK, addr=0x200000, size=0xeffa8
RunBL31 0x10000
NOTICE: BL31: v1.3(debug):0e7a845
NOTICE: BL31: Built : 16:13:46, Apr 17 2019
NOTICE: BL31: Rockchip release version: v1.1
INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO: Using opteed sec cpu_context!
INFO: boot cpu mask: 0
INFO: plat_rockchip_pmu_init(1181): pd status 3e
INFO: BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR: Error initializing runtime service opteed_fast
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
U-Boot 2017.09-00004-g674eaa57f0-dirty (Oct 27 2019 - 17:45:25 -0700)
Model: Rockchip RK3399 rockpi4b Board
PreSerial: 2
DRAM: 3.9 GiB
Relocation Offset is: f5bdf000
Sysmem: init
I2c speed: 400000Hz
PMIC: RK808
vdd-center init 950000 uV
MMC: dwmmc@fe320000: 1, sdhci@fe330000: 0
Using default environment
Model: Rockchip RK3399 rockpi4b Board
dcache off
Device 0: Vendor: 0x144d Rev: 1L1QCXB7 Prod: S341NX0H801177
Type: Hard Disk
Capacity: 122104.3 MB = 119.2 GB (250069680 x 512)
... is now current device
Bootdev: nvme 0
rockchip_get_bootdev: can't find dev_desc!
[Vendor ERROR]:Invalid boot device type(0)
rockchip_get_bootdev: can't find dev_desc!
[Vendor ERROR]:Invalid boot device type(0)
rockchip_get_bootdev: can't find dev_desc!
rockchip_get_boot_mode: dev_desc is NULL!
rockchip_get_bootdev: can't find dev_desc!
init_resource_list: dev_desc is NULL!
Can't find file:logo.bmp
failed to display uboot logo
CLK: (uboot. arml: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
CLK: (uboot. armb: enter 24000 KHz, init 24000 KHz, kernel 0N/A)
aplll 816000 KHz
apllb 24000 KHz
dpll 800000 KHz
cpll 24000 KHz
gpll 800000 KHz
npll 600000 KHz
vpll 24000 KHz
aclk_perihp 133333 KHz
hclk_perihp 66666 KHz
pclk_perihp 33333 KHz
aclk_perilp0 266666 KHz
hclk_perilp0 88888 KHz
pclk_perilp0 44444 KHz
hclk_perilp1 100000 KHz
pclk_perilp1 50000 KHz
Net: eth0: ethernet@fe300000
Hit key to stop autoboot('CTRL+C'): 0
Device 0: Vendor: 0x144d Rev: 1L1QCXB7 Prod: S341NX0H801177
Type: Hard Disk
Capacity: 122104.3 MB = 119.2 GB (250069680 x 512)
... is now current device
Scanning nvme 0:4...
pxefile_addr_str = 0x00500000
bootfile = /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
reading /extlinux/extlinux.conf
599 bytes read in 1 ms (585 KiB/s)
select kernel
1: kernel-4.4.154-90-rockchip-ga14f6502e045
2: kernel-4.4.154-88-rockchip-00030-g90239a6
Enter choice: Retrieving file: /hw_intfc.conf
reading /hw_intfc.conf
1719 bytes read in 1 ms (1.6 MiB/s)
dtoverlay number: 0, name:/overlays/console-on-ttyS2.dtbo
dtoverlay number: 1, name:/overlays/pcie-gen2.dtbo
dtoverlay number: 2, name:/overlays/spi1-flash.dtbo
hw_conf.valid = 1
hw_conf.pwm0 = 0
hw_conf.pwm1 = 0
hw_conf.uart2 = 0
hw_conf.uart4 = 0
hw_conf.spi1 = 1
hw_conf.spi2 = 0
hw_conf.i2c2 = 0
hw_conf.i2c6 = 0
hw_conf.i2c7 = 0
hw_conf.dts_overlay_count = 3
hw_conf.dts_overlay[0] = /overlays/console-on-ttyS2.dtbo
hw_conf.dts_overlay[1] = /overlays/pcie-gen2.dtbo
hw_conf.dts_overlay[2] = /overlays/spi1-flash.dtbo
1: kernel-4.4.154-90-rockchip-ga14f6502e045
Retrieving file: /vmlinuz-4.4.154-90-rockchip-ga14f6502e045
reading /vmlinuz-4.4.154-90-rockchip-ga14f6502e045
19427336 bytes read in 38 ms (487.6 MiB/s)
append: earlyprintk console=ttyFIQ0,1500000n8 init=/sbin/init root=PARTUUID=b921b045-1d rw rootwait rootfstype=ext4
Retrieving file: /dtbs/4.4.154-90-rockchip-ga14f6502e045/rockchip/rockpi-4b-linux.dtb
reading /dtbs/4.4.154-90-rockchip-ga14f6502e045/rockchip/rockpi-4b-linux.dtb
93859 bytes read in 6 ms (14.9 MiB/s)
fdt addr 0000000008300000
fdt magic number edfe0dd0
fdt size 1048576
merge_dts_overlay
Retrieving file: /overlays/console-on-ttyS2.dtbo
reading /overlays/console-on-ttyS2.dtbo
774 bytes read in 2 ms (377.9 KiB/s)
overlay dtb(0x0000000008200000) is valid
fdt_overlay_apply 0000000008300000 0000000008200000
merge_dts_overlay
Retrieving file: /overlays/pcie-gen2.dtbo
reading /overlays/pcie-gen2.dtbo
313 bytes read in 2 ms (152.3 KiB/s)
overlay dtb(0x0000000008200000) is valid
fdt_overlay_apply 0000000008300000 0000000008200000
merge_dts_overlay
Retrieving file: /overlays/spi1-flash.dtbo
reading /overlays/spi1-flash.dtbo
765 bytes read in 2 ms (373 KiB/s)
overlay dtb(0x0000000008200000) is valid
fdt_overlay_apply 0000000008300000 0000000008200000
## Flattened Device Tree blob at 08300000
Booting using the fdt blob at 0x8300000
Loading Device Tree to 00000000e9cc2000, end 00000000e9dc4fff ... OK
Adding bank: 0x00200000 - 0xf8000000 (size: 0xf7e00000)
Total: 13909.723 ms
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.154-90-rockchip-ga14f6502e045 (root@2705a206000b) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #22 SMP Tue Jul 30 10:32:28 UTC 2019
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc0f7ed8000 s46248 r8192 d31576 u86016
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 999432
[ 0.000000] Kernel command line: earlyprintk console=ttyFIQ0,1500000n8 init=/sbin/init root=PARTUUID=b921b045-1d rw rootwait rootfstype=ext4
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] software IO TLB [mem 0xef600000-0xf3600000] (64MB) mapped at [ffffffc0ef600000-ffffffc0f35fffff]
[ 0.000000] Memory: 3902464K/4061184K available (11774K kernel code, 1564K rwdata, 4384K rodata, 1216K init, 778K bss, 158720K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB)
[ 0.000000] .init : 0xffffff8009050000 - 0xffffff8009180000 ( 1216 KB)
[ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008c00000 ( 11776 KB)
[ 0.000000] .rodata : 0xffffff8008c00000 - 0xffffff8009050000 ( 4416 KB)
[ 0.000000] .data : 0xffffff8009180000 - 0xffffff8009307008 ( 1565 KB)
[ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
[ 0.000000] 0xffffffbdc0008000 - 0xffffffbdc3e00000 ( 61 MB actual)
[ 0.000000] fixed : 0xffffffbffe7fb000 - 0xffffffbffec00000 ( 4116 KB)
[ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB)
[ 0.000000] memory : 0xffffffc000200000 - 0xffffffc0f8000000 ( 3966 MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
[ 0.000000] ITS: allocated 65536 Devices @ef100000 (psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GIC: using LPI property table @0x00000000ef090000
[ 0.000000] ITS: Allocated 1792 chunks for LPIs
[ 0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
[ 0.000000] CPU0: using LPI pending table @0x00000000ef0a0000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[ 0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
[ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
[ 0.000000] rockchip_cpuclk_pre_rate_change: limiting alt-divider 33 to 31
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.001378] Console: colour dummy device 80x25
[ 0.001403] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.001417] pid_max: default: 32768 minimum: 301
[ 0.001539] Security Framework initialized
[ 0.001549] Yama: becoming mindful.
[ 0.001576] AppArmor: AppArmor disabled by boot time parameter
[ 0.001631] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.001643] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.002422] Initializing cgroup subsys io
[ 0.002442] Initializing cgroup subsys memory
[ 0.002475] Initializing cgroup subsys devices
[ 0.002488] Initializing cgroup subsys freezer
[ 0.002502] Initializing cgroup subsys net_cls
[ 0.002514] Initializing cgroup subsys perf_event
[ 0.002528] Initializing cgroup subsys net_prio
[ 0.002546] Initializing cgroup subsys hugetlb
[ 0.002557] Initializing cgroup subsys pids
[ 0.002600] ftrace: allocating 43043 entries in 169 pages
[ 0.112986] sched-energy: Sched-energy-costs installed from DT
[ 0.113004] CPU0: update cpu_capacity 401
[ 0.113066] ASID allocator initialised with 32768 entries
[ 0.116205] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[ 0.116713] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[ 0.118047] Detected VIPT I-cache on CPU1
[ 0.118081] CPU1: found redistributor 1 region 0:0x00000000fef20000
[ 0.118111] CPU1: using LPI pending table @0x00000000ef330000
[ 0.118157] CPU1: update cpu_capacity 401
[ 0.118162] CPU1: Booted secondary processor [410fd034]
[ 0.118707] Detected VIPT I-cache on CPU2
[ 0.118728] CPU2: found redistributor 2 region 0:0x00000000fef40000
[ 0.118756] CPU2: using LPI pending table @0x00000000ef360000
[ 0.118783] CPU2: update cpu_capacity 401
[ 0.118787] CPU2: Booted secondary processor [410fd034]
[ 0.119303] Detected VIPT I-cache on CPU3
[ 0.119323] CPU3: found redistributor 3 region 0:0x00000000fef60000
[ 0.119350] CPU3: using LPI pending table @0x00000000ef3c0000
[ 0.119377] CPU3: update cpu_capacity 401
[ 0.119380] CPU3: Booted secondary processor [410fd034]
[ 0.119907] Detected PIPT I-cache on CPU4
[ 0.119935] CPU4: found redistributor 100 region 0:0x00000000fef80000
[ 0.119973] CPU4: using LPI pending table @0x00000000ef3f0000
[ 0.120011] CPU4: update cpu_capacity 1024
[ 0.120014] CPU4: Booted secondary processor [410fd082]
[ 0.120571] Detected PIPT I-cache on CPU5
[ 0.120589] CPU5: found redistributor 101 region 0:0x00000000fefa0000
[ 0.120625] CPU5: using LPI pending table @0x00000000ee820000
[ 0.120653] CPU5: update cpu_capacity 1024
[ 0.120656] CPU5: Booted secondary processor [410fd082]
[ 0.120742] Brought up 6 CPUs
[ 0.120823] SMP: Total of 6 processors activated.
[ 0.120832] CPU features: detected feature: GIC system register CPU interface
[ 0.120844] CPU: All CPU(s) started at EL2
[ 0.120892] alternatives: patching kernel code
[ 0.122314] devtmpfs: initialized
[ 0.138701] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.138727] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.139210] xor: measuring software checksum speed
[ 0.176000] 8regs : 2855.000 MB/sec
[ 0.216062] 8regs_prefetch: 2560.000 MB/sec
[ 0.256124] 32regs : 3191.000 MB/sec
[ 0.296186] 32regs_prefetch: 2844.000 MB/sec
[ 0.296192] xor: using function: 32regs (3191.000 MB/sec)
[ 0.296217] pinctrl core: initialized pinctrl subsystem
[ 0.297034] NET: Registered protocol family 16
[ 0.308898] cpuidle: using governor ladder
[ 0.320919] cpuidle: using governor menu
[ 0.320944] Registered FIQ tty driver
[ 0.321115] vdso: 2 pages (1 code @ ffffff8008c06000, 1 data @ ffffff8009184000)
[ 0.321148] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.321312] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.411384] console [ttyFIQ0] enabled
[ 0.411926] Registered fiq debugger ttyFIQ0
[ 0.496572] raid6: int64x1 gen() 452 MB/s
[ 0.564654] raid6: int64x1 xor() 393 MB/s
[ 0.632716] raid6: int64x2 gen() 754 MB/s
[ 0.700838] raid6: int64x2 xor() 600 MB/s
[ 0.768980] raid6: int64x4 gen() 1100 MB/s
[ 0.837050] raid6: int64x4 xor() 672 MB/s
[ 0.905141] raid6: int64x8 gen() 861 MB/s
[ 0.973241] raid6: int64x8 xor() 627 MB/s
[ 1.041356] raid6: neonx1 gen() 923 MB/s
[ 1.109502] raid6: neonx1 xor() 655 MB/s
[ 1.177573] raid6: neonx2 gen() 1554 MB/s
[ 1.245692] raid6: neonx2 xor() 980 MB/s
[ 1.313782] raid6: neonx4 gen() 1998 MB/s
[ 1.381874] raid6: neonx4 xor() 1171 MB/s
[ 1.450009] raid6: neonx8 gen() 1696 MB/s
[ 1.518104] raid6: neonx8 xor() 1238 MB/s
[ 1.518485] raid6: using algorithm neonx4 gen() 1998 MB/s
[ 1.518963] raid6: .... xor() 1171 MB/s, rmw enabled
[ 1.519406] raid6: using intx1 recovery algorithm
[ 1.521730] vcc3v3_sys: supplied by vcc_sys
[ 1.522567] vcc3v3_pcie: supplied by vcc3v3_sys
[ 1.523366] vcc5v0_host: supplied by vcc_sys
[ 1.524122] vcc5v0_otg: supplied by vcc_sys
[ 1.525251] iommu: Adding device ff650000.vpu_service to group 0
[ 1.525857] iommu: Adding device ff660000.rkvdec to group 1
[ 1.526442] iommu: Adding device ff8f0000.vop to group 2
[ 1.527000] iommu: Adding device ff900000.vop to group 3
[ 1.527541] iommu: Adding device ff910000.rkisp1 to group 4
[ 1.529545] SCSI subsystem initialized
[ 1.530231] usbcore: registered new interface driver usbfs
[ 1.530758] usbcore: registered new interface driver hub
[ 1.531317] usbcore: registered new device driver usb
[ 1.531847] media: Linux media interface: v0.10
[ 1.532274] Linux video capture interface: v2.00
[ 1.532781] pps_core: LinuxPPS API ver. 1 registered
[ 1.533225] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 1.534041] PTP clock support registered
[ 1.535488] Advanced Linux Sound Architecture Driver Initialized.
[ 1.536527] Bluetooth: Core ver 2.21
[ 1.536867] NET: Registered protocol family 31
[ 1.537264] Bluetooth: HCI device and connection manager initialized
[ 1.537829] Bluetooth: HCI socket layer initialized
[ 1.538266] Bluetooth: L2CAP socket layer initialized
[ 1.538732] Bluetooth: SCO socket layer initialized
[ 1.539546] NetLabel: Initializing
[ 1.539852] NetLabel: domain hash size = 128
[ 1.540238] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.540711] NetLabel: unlabeled traffic allowed by default
[ 1.541780] clocksource: Switched to clocksource arch_sys_counter
[ 1.600595] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[ 1.601518] NET: Registered protocol family 2
[ 1.602368] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 1.603265] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
[ 1.604770] TCP: Hash tables configured (established 32768 bind 32768)
[ 1.605454] UDP hash table entries: 2048 (order: 5, 196608 bytes)
[ 1.606190] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
[ 1.607128] NET: Registered protocol family 1
[ 1.608554] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 1.609357] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 1.613072] audit: initializing netlink subsys (disabled)
[ 1.613593] audit: type=2000 audit(1.536:1): initialized
[ 1.614492] Initialise system trusted keyring
[ 1.615253] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.622856] VFS: Disk quotas dquot_6.6.0
[ 1.623361] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.625415] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.626698] fuse init (API version 7.23)
[ 1.627763] JFS: nTxBlock = 8192, nTxLock = 65536
[ 1.634961] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 1.637729] Key type big_key registered
[ 1.638143]
[ 1.638143] TEE Core Framework initialization (ver 1:0.1)
[ 1.638761] TEE armv7 Driver initialization
[ 1.639551] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0"
[ 1.640138] TEE core: Alloc the misc device "opteearmtz00" (id=0)
[ 1.640854] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=62)
[ 1.645492] NET: Registered protocol family 38
[ 1.645930] Key type asymmetric registered
[ 1.646300] Asymmetric key parser 'x509' registered
[ 1.646911] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 1.647713] io scheduler noop registered
[ 1.648072] io scheduler deadline registered (default)
[ 1.648558] io scheduler cfq registered
[ 1.650464] phy phy-ff770000.syscon:[email protected]: Failed to get VBUS supply regulator
[ 1.652469] phy phy-ff770000.syscon:[email protected]: Failed to get VBUS supply regulator
[ 1.657897] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
[ 1.658481] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
[ 1.659061] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
[ 1.694273] PCI host bridge /pcie@f8000000 ranges:
[ 1.694710] MEM 0xfa000000..0xfbdfffff -> 0xfa000000
[ 1.695170] IO 0xfbe00000..0xfbefffff -> 0xfbe00000
[ 1.695919] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
[ 1.696507] pci_bus 0000:00: root bus resource [bus 00-1f]
[ 1.697000] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff]
[ 1.697610] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfbe00000-0xfbefffff])
[ 1.698847] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.705851] pci 0000:00:00.0: BAR 8: assigned [mem 0xfa000000-0xfa0fffff]
[ 1.706451] pci 0000:01:00.0: BAR 0: assigned [mem 0xfa000000-0xfa003fff 64bit]
[ 1.707105] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.707553] pci 0000:00:00.0: bridge window [mem 0xfa000000-0xfa0fffff]
[ 1.708197] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[ 1.708952] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
[ 1.709571] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.710987] rk-vcodec ff650000.vpu_service: no regulator for vcodec
[ 1.711821] rk-vcodec ff650000.vpu_service: probe device
[ 1.712494] rk-vcodec ff650000.vpu_service: drm allocator with mmu enabled
[ 1.713691] rk-vcodec ff650000.vpu_service: could not find power_model node
[ 1.714329] rk-vcodec ff650000.vpu_service: init success
[ 1.715044] rk-vcodec ff660000.rkvdec: no regulator for vcodec
[ 1.716018] rk-vcodec ff660000.rkvdec: probe device
[ 1.716621] rk-vcodec ff660000.rkvdec: drm allocator with mmu enabled
[ 1.717581] rk-vcodec ff660000.rkvdec: could not find power_model node
[ 1.718175] rk-vcodec ff660000.rkvdec: init success
[ 1.719990] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 1.720659] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[ 1.722897] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 1.723566] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[ 1.725462] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
[ 1.727790] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 35, base_baud = 1500000) is a 16550A
[ 1.729610] [drm] Initialized drm 1.1.0 20060810
[ 1.733401] [drm] Rockchip DRM driver version: v1.0.1
[ 1.734211] rockchip-drm display-subsystem: dmc is disabled
[ 1.734991] rockchip-vop ff900000.vop: missing rockchip,grf property
[ 1.735812] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff8008cbe128)
[ 1.736547] rockchip-vop ff8f0000.vop: missing rockchip,grf property
[ 1.737295] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff8008cbe128)
[ 1.738294] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports
[ 1.738887] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver
[ 1.739666] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[ 1.741204] rockchip-drm display-subsystem: bound ff940000.hdmi (ops 0xffffff8008cb4880)
[ 1.741956] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.742540] [drm] No driver support for vblank timestamp query.
[ 1.743232] rockchip-drm display-subsystem: failed to parse loader memory
[ 1.743846] rockchip-drm display-subsystem: No connectors reported connected with modes
[ 1.744573] [drm] Cannot find any crtc or sizes - going 1024x768
[ 1.756487] Console: switching to colour frame buffer device 128x48
[ 1.763221] rockchip-drm display-subsystem: fb0: frame buffer device
[ 1.776102] mali ff9a0000.gpu: Failed to get regulator
[ 1.776560] mali ff9a0000.gpu: Power control initialization failed
[ 1.777444] Unable to detect cache hierarchy for CPU 0
[ 1.778689] brd: module loaded
[ 1.784265] loop: module loaded
[ 1.784874] lkdtm: No crash points registered, enable through debugfs
[ 1.786105] nvme 0000:01:00.0: enabling device (0000 -> 0002)
[ 1.787763] rockchip-spi ff1d0000.spi: Failed to request TX DMA channel
[ 1.788351] rockchip-spi ff1d0000.spi: Failed to request RX DMA channel
[ 1.788935] rockchip-spi ff1d0000.spi: no high_speed pinctrl state
[ 1.790061] m25p80 spi32766.0: xt25f32b (4096 Kbytes)
[ 1.790520] 1 ofpart partitions found on MTD device spi32766.0
[ 1.791033] Creating 1 MTD partitions on "spi32766.0":
[ 1.791492] 0x000000000000-0x000000400000 : "loader"
[ 1.793215] CAN device driver interface
[ 1.794516] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[ 1.795139] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[ 1.795643] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11).
[ 1.796161] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[ 1.796881] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[ 1.797499] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[ 1.803059] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[ 1.803669] stmmac - user ID: 0x10, Synopsys ID: 0x35
[ 1.804112] Ring mode enabled
[ 1.804383] DMA HW capability register supported
[ 1.804780] Normal descriptors
[ 1.805085] RX Checksum Offload Engine supported (type 2)
[ 1.805573] TX Checksum insertion supported
[ 1.805957] Wake-Up On Lan supported
[ 1.806317] Enable RX Mitigation via HW Watchdog Timer
[ 1.881175] libphy: stmmac: probed
[ 1.881492] eth%d: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
[ 1.882088] eth%d: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
[ 1.884668] Rockchip WiFi SYS interface (V1.00) ...
[ 1.885246] usbcore: registered new interface driver cdc_ether
[ 1.885839] usbcore: registered new interface driver rndis_host
[ 1.893439] rockchip-dwc3 usb0: fail to get drvdata hcd
[ 1.897420] blk_queue_max_segments: set to minimum 1
[ 1.902054] rockchip-dwc3 usb1: fail to get drvdata hcd
[ 1.902250] nvme0n1: p1 p2 p3 p4 p5
[ 1.904058] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.904643] ehci-pci: EHCI PCI platform driver
[ 1.905097] ehci-platform: EHCI generic platform driver
[ 1.909250] ehci-platform fe380000.usb: EHCI Host Controller
[ 1.909932] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
[ 1.910729] ehci-platform fe380000.usb: irq 28, io mem 0xfe380000
[ 1.921797] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[ 1.922507] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.923106] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.923748] usb usb1: Product: EHCI Host Controller
[ 1.924182] usb usb1: Manufacturer: Linux 4.4.154-90-rockchip-ga14f6502e045 ehci_hcd
[ 1.924859] usb usb1: SerialNumber: fe380000.usb
[ 1.925749] hub 1-0:1.0: USB hub found
[ 1.926132] hub 1-0:1.0: 1 port detected
[ 1.930404] ehci-platform fe3c0000.usb: EHCI Host Controller
[ 1.931123] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
...