My device is not Radxa it is Seeed studio product with RK3568b2:
LinkStar-H68K-1432 V2
I did not find decision in my vendor’s forum:
https://forum.seeedstudio.com/t/rockchip-rk3568-h68k-v2-emmc-broken-filesystem-is-it-bricked/280777
and my question is:
is this procedure complete anyone?
the problem persists
can anybody help?
there is some info:
./rkdeveloptool wl 0x0 …/openwrt-23.05.0-bcm27xx-bcm2711-rpi-4-ext4-sysupgrade.img
Write LBA failed!
(base) root@intel-m900:/home/xadmin/rkdeveloptool# ./rkdeveloptool ld
DevNo=1 Vid=0x2207,Pid=0x350a,LocationID=102 Maskrom
(base) root@intel-m900:/home/xadmin/rkdeveloptool# ./rkdeveloptool rid
Flash ID: 45 4D 4D 43 20
(base) root@intel-m900:/home/xadmin/rkdeveloptool# ./rkdeveloptool rfi
Flash Info:
Manufacturer: SAMSUNG, value=00
Flash Size: 2095982 MB
Flash Size: -2396160 Sectors
Block Size: 512 KB
Page Size: 2 KB
ECC Bits: 0
Access Time: 40
Flash CS: Flash<0>
(base) root@intel-m900:/home/xadmin/rkdeveloptool# ./rkdeveloptool rci
Chip Info: 38 36 35 33 AD FF FF FF FF FF FF 7B FF DF FF DE
(base) root@intel-m900:/home/xadmin/rkdeveloptool# ./rkdeveloptool rcb
Capability:27 03 00 00 00 00 00 00
Direct LBA: enabled
Vendor Storage: enabled
First 4m Access: enabled
Read Com Log: enabled
Read IDB Config: enabled
New IDB: enabled
