Empezar desde 0? Qué me aconsejan?

#1

Hi. I am trying to start from nvme, both with Armbian and with Debian official images of the Radxa page without success. I can boot both images from the sd card, then I did all the steps to update spi, (in this step I think I have managed to do it correctly only after several attempts, because I realized that I was eating a step at the end of the guide). That said, I think the spi update was done incorrectly and therefore I cannot boot from image in nvme. So, my question is: Do you advise me to delete the image of spi and start from scratch again?
Thank you, forgive my English, you must have some flaws.

#2

Here is the steps to erase the SPI image:

https://wiki.radxa.com/Rockpi4/dev/spi-install#Erase_images_on_SPI_device

Btw, what’s your SSD model number?

#3

Thanks for the reply. I have to delete or just update spi with the 23.25 pin method, is that enoughthe nvme is Lenovo sl700 pci-e m.2 2280 256 g