Can't boot new rockpi

[aaditya]

@jam

I can’t find specs for apple charger. but I’d expect 65 W would be 32V at 2A.

Apple mac USB C charger is reported to work:

Is Radxa going to ship a power supply with it?

My Apple Macbook Pro 2018 charger’s specs: USB-C 61W power supply Input: 100-240V/1.5A 50-60Hz (USB PD) Output: 20.3V/3A, 15V/3A, 9V/3A, 5.2V/3A I hope Rock Pi N10 can be powered using this.

I dunno why its not working in your case.
There is a report of Rock Pi not booting with serial console attached and USB PD, try removing the serial console and see if it works.

PD power supply conflicts with serial console?

Follow https://wiki.radxa.com/Rockpi4/dev/serial-console instructions, connect your RockPI4B to your PC with a TTL 2USB cable. then plug in the PD power cable(ZMI 65W), The board does not boot up and LED is not on either. Without the TTL 2USB plugged, everything works well. QC power supply works well. Apple A1718 PD power supply works well. It’s probably the defect of ZMI 65W power supply. Will do more test to confirm this.