Cannot use ttyS3 on Rock pi S0 (Radxa ROCK S0 Debian Build 6)

Hi,
I want to use UART3 for communication but it show error that ‘Could not configure port (5, ‘Input/output error’)’
Here is the code and system log. Could anyone support me in this case?
Code
import serial
try:
ser = serial.Serial(’/dev/ttyS3’, 115200, timeout=1)
print(‘UART /dev/ttyS3 accessible by www-data’)
ser.close()
except Exception as e:
print(‘UART access error:’, e)
Output
UART access error: Could not configure port: (5, 'Input/output error')

System configuration log
sudo cat /proc/tty/driver/serial
serinfo:1.0 driver revision:
0: uart:16550A mmio:0xFF0A0000 irq:31 tx:10365 rx:0 RTS|DTR
1: uart:16550A mmio:0xFF0E0000 irq:33 tx:37328 rx:2483 DTR
2: uart:16550A mmio:0xFF0C0000 irq:32 tx:0 rx:0
3: uart:unknown port:00000000 irq:0