Booting vom NVME

[Kretikus]

Hi,
Since I could still boot from sdcard, I booted into an official radxa image and downloaded the latest FW from this thread:

Radxa Dragon Q6A firmware snapshot

The Dragon Q6A is shipped with the SPI boot firmware pre-flashed. Normally, you do not need to re-flash it. If you are using RadxaOS, the boot firmware could be updated using the rsetup utility. However, if you are using a third-party Linux OS or Windows ARM64, you may need to update the boot firmware manually. Latest release 2026-01-20 firmware release There are two methods for manually updating the firmware, both of which require the edl-ng tool. 1. On-device update First, navigate to the …

I used the edl-ng tool to flash.