Armbian hangs on reboot after updating loader

#1

Hi,

After updating the Boot loader to allow boot from soldered on SDnand chip per these instructions:

https://wiki.radxa.com/RockpiS/dev/sdnand-install

the RockPi-S will no longer reboot under Armbian.
A powercycle or reset is required to restart.

Any ideas what’s happening here?

1 Like
#2

Turns out this is due to the default boot loader not supporting SDnand at all. Fix is documented here:

https://wiki.radxa.com/RockpiS/dev/sdnand-install