They mention Rock Pi 5.
And Rock Pi 5 currently has support for kernel 5.10.
So I expect that Rock Pi 5 and the other more popular boards will receive these updates…
However, for Rock Pi E, it looks like support is not very good.
eg. There is no DietPi.
eg. The latest Kernel you can run on Rock Pi E at the moment is 4.4.194-21.
ROCK Pi E will be updated to mainline kernel, as planned. We should do a first release in two weeks.
Is 6.1.y, provided by Armbian (6.3.y if you feel more adventurous)
https://www.armbian.com/rockpie/
… where Dietpi downloads most of images they “support”, apply branding, and sells advantage BS.
Thanks!
For my specific application, I’m needing the gigabit Ethernet port.
Supposedly that isn’t working with newer armbian builds.
What is the problem? It works perfectly well. Perhaps you have a broken device, unsupported revision, you are running some unofficial builds or you (or the one you read complaining) simply don’t know how to configure networking?
Armbian 23.02.0-trunk Bookworm with Linux 6.1.30-rockchip64 https://paste.armbian.com/cahadisefe
100M
iperf3 -c 10.0.40.189
101 Mbits/sec
1000M
iperf3 -c 10.0.30.154
954 Mbits/sec
Make sure to support people that provides you this and maintain this in a working state.
I must admit, I haven’t tried it myself.
It was based on an earlier topic here: Rock Pi e Board Version 1.21 ethhernet not working in Armbian
Is your board V1.21 too? If so, I’ll give armbian a try.
Only now you are mentioning board revision and now its probably clear why it doesn’t work. The problem you have is not made by Armbian.
I would proceed from topic you are referring too. Keep in mind that such changes can’t be supported / sponsored by Armbian developers. Until then, hints exists, Armbian provides nice SDK for development. By investing some time you should be able to fix this …
At this point, I’m pretty content with waiting the 2 weeks for the mainline kernel release.
Where do you think they will download this code?
I’m not specifically looking at dietpi.
TBH, any debian or ubuntu CLI/minimal image with at least kernel 5.XX will be fine for me.
And according to post #4 above. Are there plans to provide a > 5.10 kennel for the Debian Bullseye build?
I’m hoping either one of those will be available out of the box, without me needing to apply any hacks or overlays to get the Gigabit NIC working. For maintainability sake.
Sure, but you should know few things. Project is focused only into copying image from someone. Projects sells itself as minimal images, but Armbian / Debian is lighter, far lighter. Most people are simply too uneducated / blind to understand someone is selling pure lie / BS as a key advantage.
When (Armbian) developers fixes a problem, they are fixing it for everyone, while Dietpi does not fix any common problems. They even have balls to demand support from projects they are stealing from and encourage their users to drop shit to people they should respect and support. Anyway developers, that are caring for open source, are totally overloaded with 3rd party problems and its not possible to fix your problems instead of you.
Long term sustainability and maintainability is prime reason why Armbian exits in first place. Everything that is valuable in Dietpi, comes from Armbian … Vendors sells hardware and promises, promises and hardware. They can’t provide you “support of Raspberry Pi”, but you need some time and perspective to see it with your own eyes.
Someone has to get his hands dirty. Thousands of patches already exists. Why? Sometimes it takes weeks, sometimes months, often years before promise of support (from people that has to support competitors with this act too) is realised. It is you who have problems, but if you might be lucky and someone with the need will go that route before you …
Hi jack,
Any updated ETA on this?
You are kidding right? it is approaching 3rd quarter 2024… and that means 9 months or close it, and still not 6.1+ or even Debian 12?
Just released with 6.6, latest debian 12 or 13 or buntu 24.04, tested, better maintained you won’t find https://www.armbian.com/rockpie/
Enjoy!
Yahooo! Cannot wait to check this out! Wait… Will this work with Zero 3E and 3W?
This particular image not. You need to pick different one:
@igorp, Thanks. Unfortunately… that image is not current in respect to the kernel version 6.6.x, but fortunately, 6.1.x better than 5.1.x of the Debian images (b6). That seems to be the consistent issue… All the focus on Armbian not Debian per se. Our standard is Debian. Bit of a catch-22.
I know what Armbian is, but thanks for the link. The issue is we are a Pi based environment, evaluating and considering RADXA SBCs, and since Debian is officially supported, this lets us avoid re-tools and re-training, or so we hope and is key to our use case. Hence the questions I asked. It appears, as with IndieDroid NOVA which we also evaluated, that OS support is less robust as we hoped in direct support of Debian. This does not disqualify RADXA but it does complicate things.
We previously worked on this, but there were some remaining issues preventing it from being released, and the project got paused. I’ll arrange some engineer hours back into this later.