MIPI 10" screen with Android

[tsadigov]

I explain how I did this for armbian here

MIPI Display Support

Sure @le51. May be there is simpler way of doing that, if yes I would like to know. I am also thinking about releasing prebuilt image with these changes. Here is what I did and the reasoning behind it. kernel should have needed drivers/modules to run the hardware. I am building armbian image using their builder. There I enable few modules. CONFIG_DRM_PANEL_RADXA_DISPLAY_8HD=y CONFIG_DRM_PANEL_JADARD_JD9365DA_H3=y Why these modules? These where enabled in debian/ubuntu from Radxa where di…

In order to have the Android kernel that includes required modules I used suggestion from @thc013

Built Android, How do I flash

just do a ./build.sh -UCKAupJ( x cores) and it builds a update.img and a gpt img to make a spi nvme image you need some additional files in rktools . here a custom manifest for the rkr12 sdk just replace the line repo init -u https://github.com/radxa/manifests.git -b Android12_RK3588_Radxa_rk8 -m rockchip-s-release.xml with repo init -u https://github.com/Shaggy013/manifests.git -b Raxda_12.1 -m default.xml and just follow rest of the guide https://wiki.radxa.com/Rock5/guide/android12

when doing both I get working display, but orientation is wrong