Clear SPI Flash

[stomcullen]

This thread (and threads inside it) should be helpful. resetting flash chip, re-flasjhing it to stock, ect.

Boot failed after flashed bios

Hello everyone, I’m encountering an issue with my Orion O6. After flashing the 0.3.0-1 BIOS, it fails to boot. The EC serial output is as follows： port is : /dev/ttyUSB0 flowcontrol : none baudrate is : 460800 parity is : none databits are : 8 stopbits are : 1 escape is : C-a local echo is : no noinit is : no noreset is : no hangup is : no nolock is : no send_cmd is : sz -vv receive_cmd is : rz -vv -E imap is : lfcrlf, omap…